LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Sliding Roof - 911 CARRERA (996)) >> Removing and installing electric motor for sliding roof sun blind - Targa >> Installing electric motor for sun blind

Installing electric motor for sun blind

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Electric Motor Components For Sun Blind - Targa
G03055515Courtesy of PORSCHE OF NORTH AMERICA, INC.
NOTE:
  • Remove ignition key.
  • Before the electric motor is installed again, visually check the status of the input shafts for damage.
ELECTRIC MOTOR COMPONENTS INSTALLING PROCEDURE - TARGA

No. Procedure Instructions
1 Installing the electric motor Push the electric motor in the -direction of the arrow-7-  . See Fig 1.
2 Screwing the electric motor tight Screw the fastening screws -4-5-6-  . See Fig 1.
3 Connecting the plug connection Press the plug connection -3-  . See Fig 1.
4 Installing cover Press the cover -2-direction of the arrow-  . See Fig 1.