Installing the rear fabric lining

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Rear Fabric Lining Components - Targa

Courtesy of PORSCHE OF NORTH AMERICA, INC.

REAR FABRIC LINING COMPONENTS INSTALLING PROCEDURE - TARGA

No.	Procedure	Instructions
1	Installing the top connection	Pull the connection seal -3b-direction of the arrow- . See Fig 1.
2	Installing the lower connection	Pull the connection seal -3a-direction of the arrow- . See Fig 1.
3	Installing the retainer	1. Engine the rear fabric lining -3- in the pin on the mount. See Fig 1.
		2. Push the retainer -2- into the groove of the pin with pointed-nose pliers. See Fig 1.
		3. Push the rubber hose -1- into the holder. See Fig 1.
	Installing fabric lining, front	See Installing the front fabric lining .