LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Sliding Roof - 911 CARRERA (996)) >> Removing and installing cover for sliding roof - Targa >> Replacing the seal for the sliding roof cover

Replacing the seal for the sliding roof cover

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

In order to replace the seal for the sliding roof, the sliding roof cover must be removed. 

  1. Removing seal
    Fig 1: Removing Seal - Targa
    G03055487Courtesy of PORSCHE OF NORTH AMERICA, INC.

See Removing cover for sliding roof .

Pull off the seal all the way round the sliding roof cover.

  1. Installing seal

    Position the seal all the way round the sliding roof cover.

    See Installing cover for sliding roof .

    Fig 2: Installing Seal - Targa
    G03055488Courtesy of PORSCHE OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals