Removing drive tubing for sun blind: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
DRIVE TUBING REMOVING PROCEDURE
| No. | Procedure | Instructions |
|---|---|---|
| Removing electric motor for sun blind | See Removing electric motor for sun blind . | |
| 1 | Removing drive tubing (metal guide tubes) | Unscrew fastening screws -1-2- . See Fig 1. |
| 2 | Removing left and right drive tubing | Unscrew fastening nuts -3-2-direction of arrow- . See Fig 1. |
| Removing mounting saddle of blind shaft, bracket and support bow | ||
| 3 | Removing input shaft | Pull input shaft -4-5-direction of arrow- . See Fig 1. |