LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Sliding Roof - 911 CARRERA (996)) >> Removing and installing electric motor for sliding roof sun blind - Targa >> Removing electric motor for sun blind

Removing electric motor for sun blind

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Electric Motor Components For Sun Blind - Targa
G03055514Courtesy of PORSCHE OF NORTH AMERICA, INC.
NOTE:
  • Close sliding roof.
  • Remove ignition key.
  • The electric motor can be removed with the sun blind in any position.
ELECTRIC MOTOR COMPONENTS REMOVING PROCEDURE - TARGA

No. Procedure Instructions
1 Removing cover for electric motor -1-  . See Fig 1. Pull cover -2-direction of the arrow-  . See Fig 1.
2 Disconnecting plug Pull apart electrical plug connection -3-  . See Fig 1.
3 Unscrewing fastenings of electric motor Unscrew fastening screws -4-5-6-  . See Fig 1.
4 Removing the electric motor Pull electric motor -1-direction of the arrow-  . See Fig 1.