LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (74 - Seat UPHOLSTERIES, Cover -- CARRERA (997)) >> WM 741919 Removing And Installing Cover For Front Backrest (Air-Conditioned Comfort Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The lumbar support and air cushions must be deflated before removing the front seat.

  1. Remove front seat. → REMOVING FRONT SEAT
  2. Mount the front seat on the assembly fixture. → 7201IN MOUNTING FRONT SEAT ON ASSEMBLY FIXTURE
  3. Remove cover for front middle backrest. → Removing Cover For Front Middle Backrest 
  4. Remove cover for backrest. → REMOVING COVER FOR BACKREST
  5. Remove control button for backrest release at the left and right. → REMOVING CONTROL BUTTON FOR BACKREST RELEASE
scientia non olet · About LEMON Manuals