LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 723119 Removing And Installing Control Button For Backrest Release (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Removing Control Button For Backrest Release

Removing Control Button For Backrest Release

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the control button -1-  up and maintain in this position.
    Fig 1: Removing Control Button
    G09829673Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    • The cloth protects the collar from damage when pushing out the control button. 
    • Note that the control button will be damaged during removal. It must not be reused. 
  2. Insert a screwdriver -2-  underneath the control button and press the control button -1-  out.
scientia non olet · About LEMON Manuals