LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (64 - Glazing, Window Control -- CARRERA (997)) >> WM 648619 Removing And Installing Rear Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 TARGA 4, 911 TARGA 4S, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect plug connection for the rear window heater.
  2. Install C-pillar trim panel at the left and right. → INSTALLING C-PILLAR TRIM 
  3. Install wiper motor for rear window washer. → INSTALLING WIPER MOTOR FOR REAR WINDOW WASHER 
  4. Install rear center panel. → INSTALLING REAR CENTER PANEL
  5. Close the door windows.


  1. Install hardtop. → INSTALLING HARDTOP
scientia non olet · About LEMON Manuals