Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

The precondition for exact adjustment of the front door window is that the door is perfectly adjusted and correctly locked in the lock peg in accordance with the joining plan. → 5000IN DIAGRAM - BODY GAP DIMENSIONS

Close the front door window -1- fully -arrow- .

Fig 1: Raising Front Door Window
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove door trim panel. → REMOVING DOOR PANEL
Pull off rubber sleeves on the door sub-frame at the top left and right.

Fig 2: Pulling Off Rubber Sleeves
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull off rubber sleeves -1- on the door at the bottom left and right.

Fig 3: Identifying Rubber Sleeves
Courtesy of PORSCHE CARS NORTH AMERICA, INC.