Removing Door Hinge (On Body Side)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Position Of Door Hinge

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Remove the wing. → REMOVING WING
Remove door. → Removing Door 575119 REMOVING AND INSTALLING DOOR
Separating inert-gas welded seams
1. 3.1. Separate inert-gas welded seams in areas -A- and -B- using a parting grinder or spherical cutter.
  
  Fig 2: Separating Inert-Gas Welded Seams
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Separating inert-gas welded seams
1. 4.1. Separate inert-gas welded seams in areas -A- and -B- using a parting grinder.
  
  Fig 3: Separating Inert-Gas Welded Seams
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.