LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 722455 Replacing Cushion Carrier For Front Backrest (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cover for front backrest. → 741919 REMOVING AND INSTALLING FRONT BACKREST COVER (FOLDING SPORTS BUCKET SEAT)
  2. Remove loop for backrest release. → 723119 REMOVING AND INSTALLING LOOP FOR BACKREST RELEASE (FOLDING SPORTS BUCKET SEAT) 
  3. Remove upper part of lock for backrest adjustment. → 723219 REMOVING AND INSTALLING LOCK FOR BACKREST ADJUSTMENT (FOLDING SPORTS BUCKET SEAT) 
  4. Remove bowden cable for backrest release. → 722519 REMOVING AND INSTALLING BOWDEN CABLE FOR BACKREST RELEASE (FOLDING SPORTS BUCKET SEAT) 
  5. Remove the side airbag. → 696319 REMOVING AND INSTALLING SIDE AIRBAG (FOLDING SPORTS BUCKET SEAT)
  6. Loosen airbag wire harness (at the backrest side). → 975619 REMOVING AND INSTALLING WIRE HARNESS FOR SEAT (FOLDING SPORTS BUCKET SEAT)
  7. Remove bottom belt strap guide at the left and right. → 692619 REMOVING AND INSTALLING BELT STRAP GUIDE (FOLDING SPORTS BUCKET SEAT)
  8. Remove cushion carrier for front backrest. → 722419 REMOVING AND INSTALLING CUSHION CARRIER FOR FRONT BACKREST (FOLDING SPORTS BUCKET SEAT) 
scientia non olet · About LEMON Manuals