LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 721955 Replacing Backrest Frame (Air-Conditioned Comfort Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0, Gt3, Gt2, Gt3 RS, Gt2 RS) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove motor for lumbar support. → 723619 REMOVING AND INSTALLING LUMBAR SUPPORT MOTOR 
  2. Remove control valve for lumbar support adjustment. → 723319 REMOVING AND INSTALLING CONTROL VALVE FOR LUMBAR SUPPORT ADJUSTMENT 
  3. Remove lumbar support. → 723419 REMOVING AND INSTALLING LUMBAR SUPPORT 
  4. Remove motor for backrest adjustment. → 728919 REMOVING AND INSTALLING MOTOR FOR BACKREST ADJUSTMENT 
  5. Remove bowden cable for backrest release. → 722519 REMOVING AND INSTALLING BOWDEN CABLE FOR BACKREST RELEASE 
  6. Loosen wire harness for backrest close to the backrest frame. → 975619 REMOVING AND INSTALLING WIRE HARNESS FOR BACKREST (FRONT SEAT)
scientia non olet · About LEMON Manuals