LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 721155 Replacing Guide Rail (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove sports bucket seat. → 720119 REMOVING AND INSTALLING FOLDING SPORTS BUCKET SEAT 
  2. Fit sports bucket seat on assembly fixture. → 7201IN MOUNTING FRONT SEAT ON ASSEMBLY FIXTURE 

    Information 

    The very front seat position is used to relieve the tension spring on the guide rail.

  3. Move sports bucket seat to the very front position.
  4. Remove front seat frame. → 720919 REMOVING AND INSTALLING FRONT SEAT FRAME (FOLDING SPORTS BUCKET SEAT) 

    Information 

    • Only for passenger seat in USA/Canada vehicles. 
  5. Remove wire harness for AWS. → 975719 REMOVING AND INSTALLING WIRE HARNESS FOR AWS (FOLDING SPORTS BUCKET SEAT)
scientia non olet · About LEMON Manuals