LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 720955 Replacing Seat Frame (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove padding for front seat. → 741019 REMOVING AND INSTALLING PADDING FOR FRONT SEAT
  2. Remove belt lock. → 692419 REMOVING AND INSTALLING FRONT BELT LOCK

    Information 

    Only for vehicles with adaptive sports seats.

  3. Remove air cushion motor. → 723919 REMOVING AND INSTALLING AIR CUSHION MOTOR 

    Information 

    Only for vehicles with adaptive sports seats.

  4. Remove air cushion control valve. → 723819 REMOVING AND INSTALLING AIR CUSHION CONTROL VALVE 

    Information 

    Only for vehicles with adaptive sports seats.

  5. Remove switch for air cushion. → 720619 REMOVING AND INSTALLING AIR CUSHION SWITCH 
  6. Remove wire harness for electrically adjustable seats. → 975719 REMOVING AND INSTALLING WIRING FOR ELECTRICALLY ADJUSTABLE SEATS

    Information 

    • Only for USA/Canada vehicles. 

    Information 

    • Passenger's seat only. 
  7. Remove AWS control unit. → 696819 REMOVING AND INSTALLING AWS CONTROL UNIT

    Information 

    Only for vehicles with adaptive sports seats.

  8. Remove air cushion for seat. → 721419 REMOVING AND INSTALLING AIR CUSHION FOR SEAT 
scientia non olet · About LEMON Manuals