LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 720955 Replacing Front Seat Frame (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install cushion carrier for backrest. → Installing Cushion Carrier For Front Backrest 

    Information 

    • Only for passenger seat in USA/Canada vehicles. 
  2. Install wire harness for AWS. → 975719 REMOVING AND INSTALLING WIRE HARNESS FOR AWS (FOLDING SPORTS BUCKET SEAT)

    Information 

    • Only for passenger seat in USA/Canada vehicles. 
  3. Install AWS control unit. → 696819 REMOVING AND INSTALLING AWS CONTROL UNIT (FOLDING SPORTS BUCKET SEAT)
  4. Install lower part of lock for backrest adjustment. → Installing Lock For Backrest Adjustment 
  5. Install padding for side bolsters. → Installing Padding For Front Seat
scientia non olet · About LEMON Manuals