Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

The battery voltage must not fall below 12.5 volts during the fuel delivery rate check.

Check the battery charge state using a voltmeter or PIWIS Tester II 9818 .
1. 1.1. Connect a charger.
Remove underbody covers.
1. 2.1. Remove rear cover.
  → 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY .
2. 2.2. Remove center part of middle cover.
  → 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY .