LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (20 - Fuel Supply, Control -- CARRERA (997)) >> WM 202519 Removing And Installing Carbon Canister (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Subsequent Work >> Subsequent Work - RoW Variant

Subsequent Work - RoW Variant

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear part of front right wheel housing liner.

    → 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER - section on "Installing".

  2. Fit front right wheel.

    Use special tool Socket-wrench insert 300  .

    → 440519 REMOVING AND INSTALLING WHEEL - section on "Installing".

    Wheel with central bolt. Use special tools socket-wrench insert 9796  and assembly aid 9794  .

    → 440519 REMOVING AND INSTALLING WHEEL WITH CENTRAL BOLT - section on "Installing"

scientia non olet · About LEMON Manuals