LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (20 - Fuel Supply, Control -- CARRERA (997)) >> WM 202519 Removing And Installing Carbon Canister (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Preliminary Work >> Preliminary Work - RoW Variant

Preliminary Work - RoW Variant

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove ignition key.
  2. Remove front right wheel.

    Socket-wrench insert 300  should be used.

    → 440519 REMOVING AND INSTALLING WHEEL - section on "Removing".

  3. Remove rear part of front right wheel housing liner.

    → 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER - section on "Removing".

scientia non olet · About LEMON Manuals