LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (20 - Fuel Supply, Control -- CARRERA (997)) >> WM 200719 Removing And Installing Filler Neck (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove adhesive tape.
  2. Install wheel housing liner.

    → 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER  - section on "Installing" 

  3. Install front wheel.

    Use special tool socket-wrench insert P300  to install the front wheel.

    → 44051900 REMOVING AND INSTALLING WHEEL - section on "Installing"

    Wheel with central bolt. Use special tools socket-wrench insert 9796  and assembly aid 9794  .

    → 440519 REMOVING AND INSTALLING WHEEL WITH CENTRAL BOLT - section on "Installing"

  4. Remove protective covers from the vehicle.
scientia non olet · About LEMON Manuals