Preliminary Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Vehicle can fall down
- Risk of squashing or crushing
- Risk of damage to the vehicle
→ Do not place any solid objects under the raised vehicle.
→ Ensure that the lifting platform is prevented from lowering.
→ Remove solid objects before lowering the vehicle.
→ Raise the vehicle only at the jacking points provided.
→ The outer jacking points should be used primarily.
- Raise the vehicle.
- Place protective covers on the vehicle to avoid damaging the vehicle.
- Remove right front wheel.
When removing the front wheel, use special tool socket-wrench insert P300 to avoid damaging the rim.
→ 44051900 REMOVING AND INSTALLING WHEEL - section on "Removing"
Wheel with central bolt. Use special tools socket-wrench insert 9796 and assembly aid 9794 .
→ 440519 REMOVING AND INSTALLING WHEEL WITH CENTRAL BOLT - section on "Removing"
- Remove rear part of front right wheel housing liner.
→ 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER - section on "Removing"