WM 200101 Checking Fuel System (High-Pressure Side) For Leaks (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO): Information: Requirements
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
If only the high-pressure pump is removed and installed, the intake manifold must be removed for leak testing.
- Battery disconnected.
→ 2X00IN02 WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY .
- Air cleaner housing removed.
→ 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING - TURBO ENGINE .
- Intake-air distributor removed.
→ 244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR - TURBO ENGINE .