LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 635519 Removing And Installing Rear Apron (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt2 RS) >> Subsequent work

Subsequent work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. After fitting the rear apron, check heat protection shields for correct assembly, and correct if necessary. → 635019 REMOVING AND INSTALLING REAR BUMPER 
  2. Install the rear light. → Installing tail light  . 
  3. Install rear wheel housing liner. → Installing rear wheel housing liner .
  4. Check gap dimensions at rear, and adjust if necessary. → WM 5000IN Diagram - body gap dimensions 
scientia non olet · About LEMON Manuals