LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 631719 Removing And Installing Front Retaining Strip(Gt3, Gt3 RS) >> Subsequent work

Subsequent work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

  1. Install servo motor for emergency release. → Installing servo motor for emergency release
  2. Install exhaust air duct.
    Fig 1: Installing Exhaust Air Duct
    G09824759Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 2.1. Clip in wire harness -2-  at the exhaust air duct -3-  - -arrow A- 
    2. 2.2. Position exhaust air duct -3-  on the body -arrow B-  and secure using the fastening nuts -1-  .
  3. Install front bumper. → Installing front bumper