LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 631719 Removing And Installing Front Retaining Strip (All Models) >> Preliminary work

Preliminary work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front apron. → Removing front apron .

    Information 

    Only open for vehicles with garage door function.

  2. Remove control unit for garage door opener. → Removing control unit for garage door opener/HomeLink 

    Information 

    • Only for USA/Canada vehicles. 
  3. Remove servo motor for emergency release. → Removing servo motor for emergency release
scientia non olet · About LEMON Manuals