LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 631537 Disassembling And Assembling Front Apron (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO) >> Preliminary work

Preliminary work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front apron. → Removing front apron .
  2. Remove auxiliary headlights. → Removing auxiliary headlight 
  3. Remove front direction indicator light at the left and right. → Removing front direction indicator light 
  4. Remove side direction indicator light on the left and right. → Removing side direction indicator light 

    Information 

    • Only for vehicles with headlight cleaning system. 
  5. Remove spray nozzle for headlight cleaning system. → Removing and installing spray nozzle head 
  6. Remove front air grille. → Removing front air grille
  7. Remove front wire harness. → Removing front wire harness 

    Information 

    • Only for vehicles with headlight cleaning system. 
  8. Remove hose for headlight cleaning system. → Removing hose for headlight washer system 
  9. Remove front spoiler. → Removing front spoiler
  10. Remove number plate cover. → Removing front number plate cover .