LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (15 - Engine - Cylinder Head, Valve Control -- CARRERA (997)) >> WM 157019 Removing And Installing Cylinder Head (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. GTS Coupe, CARR. GTS CABRIO, CARR. 4 GTS, CARR. 4 GTS CABRIO & Speedster >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install camshafts.

    → 150520 REMOVING AND INSTALLING CAMSHAFTS (INCLUDES SETTING TIMING) .

  2. Install cylinder head cover.

    → 158219 REMOVING AND INSTALLING CYLINDER HEAD COVER  - engine removed.

  3. Only for cylinder bank 1-3:  Install unit carrier (coolant distributor).

    → 195919 REMOVING AND INSTALLING UNIT CARRIER (COOLANT DISTRIBUTOR HOUSING) .

  4. Install intake-air distributor.

    → 244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR .

scientia non olet · About LEMON Manuals