LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (15 - Engine - Cylinder Head, Valve Control -- CARRERA (997)) >> WM 153719 Removing And Installing Solenoid Hydraulic Valve For Camshaft Control (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove air cleaner housing.

    → 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING - TURBO - section on "Removing".

    Information 

    • Only remove generator for the solenoid hydraulic valve for cylinder bank 1-3. 
  2. Remove generator.

    → 272219 REMOVING AND INSTALLING GENERATOR - section on "Removing"