LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (48 - Steering -- CARRERA (997)) >> WM 485855 Replacing Tie Rod Joint (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, 911 Gt3 RS, Gt2 RS, Gt3 RS 4.0) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. After fitting the pressure lines, fill the steering hydraulics with Pentosin and bleed the steering system.
  2. Fit front underbody panelling → 519219 REMOVING AND INSTALLING FRONT COVER .
  3. Fit front wheels → 440519 REMOVING AND INSTALLING WHEEL .
  4. Adjust toe → 449503 PERFORMING FRONT AND REAR SUSPENSION ALIGNMENT . Calibrate steering-angle sensor if necessary.
scientia non olet · About LEMON Manuals