Removing Cover For Center Underbody: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cover For Center Underbody Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Fastening nuts cannot be used again following removal.

Unscrew fastening screws -2- and fastening nuts -3- .

Fig 2: Removing Side Cover Fastening Nuts
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull cover for side underbody -1- out of the overlaps.