Installing Cover For Front Underbody

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of Front Underbody Cover

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

When sliding in the underbody cover, make sure the overlap is correct.

Insert cover for front underbody -1- .

Fig 2: Installing Cover Fastening Nuts
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Tighten fastening screws -2- . Tightening torque → : 1.5 ft. lb.
Tighten fastening nuts -3- . Tightening torque → : 0.5 ft. lb.