Removing Dashboard Support: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Dashboard Support Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Only for USA/Canada version vehicles

Unscrew fastening screws -1- and remove knee protector -2- .

Fig 2: Removing Knee Protector
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Push out fixing clip -1- and unclip length compensation -2- .

Fig 3: Removing Length Compensation
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Undo fastening nuts -1- and place ground straps -2- to one side.

Fig 4: Loosening Ground Straps
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Cut tie-wraps -1- on main wire harness.

Fig 5: Cutting Tie-Wraps
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening screw -1- on bracket for heater housing -2- .

Fig 6: Removing Bracket For Heater Housing
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Undo fastening nuts -1- close to the plenum panel.

Fig 7: Releasing Dashboard Support
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening screws at the left and right -1- on the dashboard support -2- .

Fig 8: Releasing Dashboard Support
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew left fastening screw -1- and remove bracket -2- .

Fig 9: Releasing Dashboard Support
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew right fastening screw -1- and pull dashboard support -3- out slightly.
Unclip cable guide -1- on left of dashboard support using a screwdriver.

Fig 10: Removing Cable Guide
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unclip cable guide -1- on dashboard support from below -Inset- .

Fig 11: Removing Cable Guide
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unclip cable guide -1- at the back of the dashboard support using a screwdriver.

Fig 12: Removing Cable Guide
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unclip wire harness with fixing clip -1, 2- on dashboard support.

Fig 13: Removing Wire Harness
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unclip cable guide -1- on right of dashboard support using a screwdriver.

Fig 14: Removing Cable Guide
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Release locking lug -Arrow A- and unclip cable guide -1- on bottom right of dashboard support in an upward direction -Arrow B- .

Fig 15: Removing Cable Guide
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

When removing the dashboard support, make sure that wires or plug connections are not damaged.
Get another person to help you remove the dashboard support carefully in an upward direction.