Removing Deformation Element
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Damaged deformation elements
- Reduced accident protection
→ The deformation elements must not be repaired.
→ Replace the deformation elements in the event of visible damage or pressure marks.
- Release electric line slightly upwards.
- Drill out blind rivets -1- with a 4 mm drill and remove the deformation element -A- .