LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (51 - Body Center, Roof, Frame - CARRERA (997)) >> WM 514555 Replacing Outer Side Member (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, Gt2, Gt2 RS & Gt3 RS) >> Installing Outer Side Member >> Danger Of Injury While Welding

Danger Of Injury While Welding

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Electric welding
  • Risk of electric shock or burns

→ Wear personal protective gear.

→ Disconnect both battery terminals.

→ Do not weld in a damp area or when it is wet under foot.

→ Move highly inflammable materials out of the work area. Ventilate the work area well.

→ Remove smoke gases with an extraction system.

→ Read specific safety information for the welder.

→ Check that welder is working perfectly before use.