LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (51 - Body Center, Roof, Frame - CARRERA (997)) >> WM 513755 Replacing Outer Hinge Pillar (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster) >> Preparing Connection Areas Of The Body For Installing Outer Hinge Pillar >> Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work

Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Grinding and welding work
  • Danger of fire or explosion

→ Avoid working in an area with highly inflammable or explosive materials.

→ Cover highly inflammable or explosive areas.

→ Remove highly inflammable or explosive parts.

scientia non olet · About LEMON Manuals