Fastening Inner Rear Center Panel

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Center Panel Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Press in seal -2- and tighten fastening nut -1- . Tightening torque → Tightening torque: 7.5 ft. lb.

Fig 2: Tightening Inner Rear Center Panel Fastening Nut
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Stick in sound absorbent film.

Fig 3: Sticking Sound Absorbent Film
Courtesy of PORSCHE CARS NORTH AMERICA, INC.