Removing Roof

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Roof Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mill off spotwelds.
1. 1.1. Using a spotweld cutter, mill off spotwelds in areas A, B, C, D .
  
  Fig 2: Cutting Spotwelds
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Loosening bonded joint
1. 2.1. Heat up the bonded joint between the roof and the cowl panel frame or the rear roof frame with the hot-air gun. Insert a metal spatula between the bonded joint and separate it. Lift the roof upwards out of the body.
  
  Fig 3: Loosening Bonded Joint
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.