Installing Roof: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Applying adhesive
1. 1.1. Apply adhesive evenly to the inside of the cowl panel frame in the form of a triangular bead Dimension X = 8 mm . Adhesive from "Wurth Klebt und Dichtet"
2. 1.2. Apply adhesive evenly to the inside of the roof frame in the form of a triangular bead Dimension X = 8 mm . Adhesive from "Wurth Klebt und Dichtet"
  
  Fig 1: Applying Adhesive To Inside Of Roof Frame
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Welding in roof
1. 2.1. Secure the roof with tensioning clamps.
2. 2.2. Spot-weld areas A, B, C, D of the roof.
  
  Fig 2: Identifying Roof Spot-Weld Areas
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.