Affixing The Roof Sound Absorber

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

The fastening points must remain accessible when positioning the sound absorbers (insulation).

Pull of the protective film and affix the roof sound absorber in the marked area.

Fig 1: Affixing Roof Sound Absorber
Courtesy of PORSCHE CARS NORTH AMERICA, INC.