Removing Thread For Belt Fastening
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Mark the cut.
- 1.1. Mark cut for removal of the threaded bushing on the inner lower side member. To do this, cut out a viewing window measuring 60 x 35 mm in the lower side member.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
- Cut out the viewing window with the body saw
- 2.1. Cut the marked area A
out of the inner lower side member using the body saw.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|