Topping Up Oil For Final Drive

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Fill level too low

Risk of damage to components.

→ Do not start the engine.

→ Do not tow the vehicle.

Replace sealing ring for drain plug and clean and tighten the drain plug. → Tightening torque: 25 Nm (19 ft. lb.)
Fill oil for final drive with ATF Filling Device For Filling Transmission Nr. 161 until oil escapes at the oil filler opening.
Replace sealing ring for filler plug, clean filler plug, and tighten. → Tightening torque: 22 Nm (16 ft. lb.)

Fig 1: Locating Final Drive Oil Filler Screw
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fit underbody panelling. → 519419 REMOVING AND INSTALLING REAR TRIM - installing