Subsequent Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Install cardan shaft.
→ WM 390219 REMOVING AND INSTALLING CARDAN SHAFT (TURBO COUPE & TURBO CABRIO) - section on "Installing"
- Check oil for front final drive and top up if necessary.
- Install underbody panelling.
→ 519319 REMOVING AND INSTALLING CENTRE COVER - section on "Installing"
→ 519419 REMOVING AND INSTALLING REAR COVER - section on "Installing"
→ 519219 REMOVING AND INSTALLING FRONT COVER - section on "Installing"
- Lower the vehicle.