Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Vehicle can fall down

Risk of squashing or crushing
Risk of damage to the vehicle

→ Do not place any solid objects under the raised vehicle.

→ Ensure that the lifting platform is prevented from lowering.

→ Remove solid objects before lowering the vehicle.

→ Raise the vehicle only at the jacking points provided.

→ The outer jacking points should be used primarily.

Jack and raise the vehicle at the prescribed jacking points.
→ WM 4X00IN LIFTING THE VEHICLE (ALL MODELS)
Remove underbody panelling.
→ 519419 REMOVING AND INSTALLING REAR COVER - section on "Removing"

→ WM 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY - section on "Removing"

→ 519219 REMOVING AND INSTALLING FRONT COVER - section on "Removing"
Remove the cardan shaft.
→ WM 390219 REMOVING AND INSTALLING CARDAN SHAFT (TURBO COUPE & TURBO CABRIO) - section on "Removing"