Subsequent Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Install support for front final drive.
→ WM 396219 REMOVING AND INSTALLING SUPPORT FOR FINAL DRIVE (CARR. 4 COUPE, TURBO COUPE, CARR. 4S COUPE, TURBO S COUPE, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, TURBO CABRIO & TURBO S CABRIO) - section on "Installing"
- Install front final drive.
→ 398819 REMOVING AND INSTALLING FRONT FINAL DRIVE - section on "Installing"
- Fill in clutch fluid for front final drive.
→ 399055 CHANGING OIL FOR FRONT FINAL DRIVE - section on "Filling in"
- Install the cardan shaft.
→ WM 390219 REMOVING AND INSTALLING CARDAN SHAFT (TURBO COUPE & TURBO CABRIO) - section on "Installing"
- Install underbody panelling.
→ 519319 REMOVING AND INSTALLING CENTRE COVER - section on "Installing"
→ 519419 REMOVING AND INSTALLING REAR COVER - section on "Installing"
→ 519219 REMOVING AND INSTALLING FRONT COVER - section on "Installing"
- Lower the vehicle.