LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (39 - Final Drive - Differential, Differential Lock -- CARRERA (997)) >> WM 396419 Removing And Installing CARDAN Flange (Turbo Coupe & Turbo CABRIO) >> Subsequent Work >> Subsequent Work - Manual Transmission

Subsequent Work - Manual Transmission

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install cardan shaft. → 390219 REMOVING AND INSTALLING CARDAN SHAFT  - section on "Installing"
  2. Check transmission oil and top up if necessary. → WM 340135 CHECKING AND TOPPING UP TRANSMISSION OIL (TURBO COUPE, TURBO S COUPE, TURBO CABRIO, TURBO S CABRIO, GT2, GT2 RS, GT3 & GT3 RS
  3. Fit underbody panels. → WM 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY  - section on "Installing"→  WM 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY  - section on "Installing"→  519219 REMOVING AND INSTALLING FRONT COVER  - section on "Installing" 
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals