LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (39 - Final Drive - Differential, Differential Lock -- CARRERA (997)) >> WM 396219 Removing And Installing Support For Front Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle at the specified jacking points. → WM 4X00IN LIFTING THE VEHICLE (ALL MODELS)
  2. Remove underbody panel. → WM 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY - removing → WM 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY - removing →
  3. Remove cardan shaft. → 390219 REMOVING AND INSTALLING CARDAN SHAFT  - section on "Removing"
  4. Remove front final drive. → 398819 REMOVING AND INSTALLING FRONT FINAL DRIVE  - section on "Removing"
scientia non olet · About LEMON Manuals