LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (39 - Final Drive - Differential, Differential Lock -- CARRERA (997)) >> WM 395819 Removing And Installing Cover For Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front final drive.

    → 398819 REMOVING AND INSTALLING FRONT FINAL DRIVE  - section on "Installing"

  2. Fill in oil for front final drive.

    → 399055 CHANGING OIL FOR FRONT FINAL DRIVE  - section on "Filling in"

  3. Install the cardan shaft.

    → 390219 REMOVING AND INSTALLING CARDAN SHAFT  - section on "Installing"

  4. Install underbody panelling.

    → WM 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY - section on "Installing"

    → WM 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY - section on "Installing"

    → WM 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY - section on "Installing"

  5. Lower the vehicle.
scientia non olet · About LEMON Manuals