LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (39 - Final Drive - Differential, Differential Lock -- CARRERA (997)) >> WM 392519 Removing And Installing Short HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, "Sport Classic", CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. GTS Coupe, CARR. GTS CABRIO & Speedster) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install right drive shaft.

    → WM 422119 REMOVING AND INSTALLING REAR DRIVE SHAFT (ALL MODELS) - section on "Installing"

  2. Check transmission oil level in the final drive and top up if necessary.

    → 399035 CHECKING AND TOPPING UP OIL FOR FINAL DRIVE 

  3. Install underbody panelling.

    → WM 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY - section on "Installing"

  4. Install rear right wheel.

    → 440519 REMOVING AND INSTALLING WHEEL - "Installing"

scientia non olet · About LEMON Manuals