LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (39 - Final Drive - Differential, Differential Lock -- CARRERA (997)) >> WM 392519 Removing And Installing Front HALFSHAFT Flange (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front drive shaft.

    → 404119 REMOVING AND INSTALLING FRONT DRIVE SHAFT - section on "Installing"

  2. Check oil for front final drive and top up if necessary.

    → 399035 CHECKING AND TOPPING UP OIL FOR FRONT FINAL DRIVE 

  3. Install front underbody panelling.

    → WM 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY - section on "Installing"

  4. Lower the vehicle.
scientia non olet · About LEMON Manuals