LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (39 - Final Drive - Differential, Differential Lock -- CARRERA (997)) >> 392219 - Removing And Installing Sealing Ring For Left HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Speedster, CARR. GTS Coupe & CARR. GTS CABRIO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install left halfshaft flange. → 392519 REMOVING AND INSTALLING LEFT HALFSHAFT FLANGE  - "Installing" chapter
  2. Check transmission oil level. → WM 340135 CHECKING AND TOPPING UP TRANSMISSION OIL (TURBO COUPE, TURBO S COUPE, TURBO CABRIO, TURBO S CABRIO, GT2, GT2 RS, GT3 & GT3 RS
  3. Fit the underbody panel. → 519419 REMOVING AND INSTALLING REAR COVER - chapter on "installing"
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals