Preliminary Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the vehicle at the prescribed jacking points.
- Remove the underbody panel.
→ 519419 REMOVING AND INSTALLING REAR COVER - chapter on "removing"
- Remove left halfshaft flange.
→ 392519 REMOVING AND INSTALLING LEFT HALFSHAFT FLANGE - "Removing" chapter